PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS Harmful if swallowed, absorbed through the skin, or inhaled. Causes moderate eye irritation. Avoid contact with eyes, skin, and clothing. Wear goggles or face shield, and rubber gloves. Remove contaminated clothing and wash before reuse. Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, or using tobacco.
ENVIRONMENTAL HAZARDS This pesticide is toxic to fish. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans, or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance, contact your State Water Board or Regional Office of the EPA. De-activation may be required during clean up if a spill occurs. De-activation of TURFD® Antimicrobial can be achieved by the addition of an anionic surfactant or detergent in quantity equivalent to that of the active ingredient.
PRODUCT FEATURES AND BENEFITS
- BioField Antimicrobial imparts durable biostatic activity to the surface of a wide variety of substrates.
- BioField Antimicrobial is effective against mold, mildew and algae, as a static agent.
- Increased efficiency – through proper application, durable bacteriostatic, fungistatic and algistatic surfaces can be attained with a minimum amount of TURFD® Antimicrobial.
- Provides freshness, combats deterioration and discoloration caused by bacteria, fungi and algae.
DIRECTIONS FOR USE
It is a violation of federal law to use this product in a manner inconsistent with its labeling.
FOR COMMERCIAL / INDUSTRIAL INSTITUTIONAL / RESIDENTIAL USE
APPROVED USES: BioField Antimicrobial is effective against odor causing bacteria, bacteria which cause staining and discoloration, fungi (mold and mildew) and algae as a static agent. BioField Antimicrobial can be used as a final bacteriostatic finish on Synthetic Turf, Recycled Rubber, Silica, Sand to impact bacteriostatic (mold and mildew) activity.
HOW TO USE: MSDS INFORMATION: BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET CAN BE OBTAINED BY WRITING TO TURFRESH.COM
Wear protective eyewear (goggles or face shield) and rubber gloves when using this product. Dry treated areas and articles such as clothing before use. Remove children and pets from treated area until completely dry. Clean surfaces prior to application.
BioTurf Antimicrobial is to be applied to organic and inorganic surfaces as supplied by dipping, soaking, spraying until adequately wet. After applying treatment, the surface must be allowed to dry at temperatures from ambient to a maximum of 160°C (320°F) to effect complete condensation of silanol groups and to remove water, solvents and/or traces of methanol from hydrolysis. If necessary, reapply BioTurf Antimicrobial every three months or when odor, staining and discoloration due to bacteria, mold stains, and mildew stains return.
For Pump Safety Spray Application: Using pump sprayer, spray entire area 4-6 inches from the surface making sure the surface is completely covered. Apply and then let stand until dry or let stand 3 minutes.
For Spray Application: Apply and then let stand until dry or let stand 3 minutes. When treating coarser substrates, more BioField Antimicrobial may be required due to absorption
For Dipping/Soaking Application: Use appropriate sized washbasin or tub for dipping/soaking the item you are treating. Use enough BioField Antimicrobial solution to completely submerge item. Completely submerge item in solution for 3 minutes. Remove item and dry. Do not reuse solution after dipping/soaking. The substrate can be dried at room temperatures or at temperatures to a maximum of 160°C (320°F).
For each application, determine optimum application and drying conditions, such as time and temperature before use. If desired, reapply BioField Antimicrobial if odor, staining and discoloration due to bacteria, mold or mildew occur.
STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage and disposal. STORAGE: Store in original, tightly closed container in an area inaccessible to children or persons unfamiliar with its use. Keep tightly closed until ready to use. Reclose tightly after each use. When stored in original, unopened containers at or below 25°C (77°F), BioField Antimicrobial has a minimum shelf life of 12 months from date of shipment.
PESTICIDE DISPOSAL: To avoid wastes, use all material in this container by application according to label directions. If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide disposal program (often such programs are run by sate or local governments or by industry).
CONTAINER DISPOSAL: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available or dispose of in trash. This container will have product residues when emptied. All hazard precautions on label must be observed when handling emptied container. NOTICE: Coating Specialists, LLC warrants that the product conforms to its chemical description and is reasonably fit for the purposes stated in the labeling when used in accordance with directions under normal conditions of use; but this warranty of fitness for a particular purpose does not extend to the use of this product contrary to written instructions, or under abnormal conditions, or under conditions not reasonably foreseeable to seller, and buyer assumes the risk of any such use.Have product container or label with you when calling Poison Control Center or doctor, or going for treatment. If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after first 5 minutes, then continue rinsing. • Call a Poison Control Center or doctor for treatment advice. If inhaled • Move person to fresh air. • If person is not breathing, call 911 or ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. • Call a Poison Control Center or doctor for treatment advice. If in skin or clothing • Take off contaminated clothing. • Rinse skin immediately with plenty of water. If swallowed • Have person sip a glass of water if able to swallow. • Do not induce vomiting unless told to do so by a Poison Control Center or doctor. • Do not give anything by mouth to an unconscious person.
3 (trihydroxysilyl) propyldimethyl octadecyl ammonium chloride …………………………… 1.44%
INERT INGREDIENTS …………………………..98.56%