PRODUCT FEATURES AND BENEFITS
- BioField Antimicrobial imparts durable bioaugmentation activity to the surface of a wide variety of substrates including but not limited to artificial sports turf systems.
- BioField Antimicrobial is effective against a variety of bacteria.
- Increased efficiency – through proper application, durable bioaugmentation can be achieved.
- Provides freshness, combats deterioration and discoloration caused by bacteria.
DIRECTIONS FOR USE
Please follow directions per application directions.
FOR COMMERCIAL / INDUSTRIAL INSTITUTIONAL / RESIDENTIAL USE
APPROVED USES: BioField Turf Cleaner is effective against odor causing bacteria, bacteria which cause staining and discoloration, fungi (mold and mildew) and algae as a static agent. BioField with BioS+ can be used as a final finish on Synthetic Turf along with many other surface types.
HOW TO USE: MSDS INFORMATION: BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET CAN BE OBTAINED BY WRITING TO TURFRESH.COM
TurFresh Antimicrobial is to be applied to organic and inorganic surfaces as supplied by dipping, soaking, spraying until adequately wet. After applying treatment, the surface must be allowed to dry at temperatures from ambient to a maximum of 160°C (320°F). If necessary, reapply TurFresh Antimicrobial every three months or when odor, staining and discoloration due to bacteria, mold stains, and mildew stains return.
For Pump Safety Spray Application: Using pump sprayer, spray entire area 4-6 inches from the surface making sure the surface is completely covered. Apply and then let stand until dry or let stand 3 minutes.
For Spray Application: Apply and then let stand until dry or let stand 3 minutes. When treating coarser substrates, more BioField Antimicrobial may be required due to absorption
For Dipping/Soaking Application: Use appropriate sized wash basin or tub for dipping/soaking the item you are treating. Use enough BioField Antimicrobial solution to completely submerge item. Completely submerge item in solution for 3 minutes. Remove item and dry. Do not reuse solution after dipping/soaking. The substrate can be dried at room temperatures or at temperatures to a maximum of 160°C (320°F).
For each application, determine optimum application and drying conditions, such as time and temperature before use. If desired, reapply BioField if odor, staining and discoloration due to bacteria, mold or mildew occur.